Electrical Power Systems Technology

Electrical Power Systems Technology

Electrical Power Systems Technology (Third Edition) provides a broad
overview of the production, distribution, control, conversion, and measurement
of electrical power. The presentation method used in this book will allow the reader to develop an understanding of electrical power systems. The units of the book are organized in a systematic manner, beginning with electrical power production methods. The fundamentals of each major unit of the book are discussed at the beginning of the unit. These fundamentals provide a framework for the information that follows in each unit. The last unit has been expanded to include control devices. This book deals with many important aspects of electrical power, not just with one or two areas. In this way, it will give the reader a better understanding of the total electrical power system—from the production of electricity to its conversion to other forms of energy. Each unit deals with a specific system, such as production, distribution, control, conversion, or measurement. Each system is broken down into subsystems. The subsystems are then explored in greater detail in the chapters that make up each unit.
Contents
Chapter 1 Power Measurement Fundamentals
Chapter 2 Power System Fundamentals
Chapter 3 Power Measurement Equipment
Chapter 4 Modern Power Systems s
Chapter 5 Alternative Power Systems
Chapter 6 Alternating Current Power Systems
Chapter 7 Direct Current Power Systems
Chapter 8 Power Distribution Fundamentals
Chapter 9 Power Distribution Equipment
Chapter 10 Single-Phase and Three-Phase
Distribution Systems
Chapter 11 Fundamentals of Electrical Loads
Chapter 12 Heating Systems
Chapter 13 Lighting Systems
Chapter 14 Mechanical Systems
Chapter 15 Power Control Devices
Chapter 16 Operational Power Control Systems
Chapter 17 Control Devices

Download:       Click here to download

Electric Motors & Drives

Electric Motors & Drives

Like its predecessors, the third edition of this book is intended primarily
for non-specialist users and students of electric motors and drives.
My original aim was to bridge the gap between specialist textbooks
(which are pitched at a level too academic for the average user) and
the more prosaic ‘handbooks’, which are full of useful detail but provide
little opportunity for the development of any real insight or understanding.
The fact that the second edition was reprinted ten times indicated
that there had indeed been a gap in the market, and that a third edition
would be worthwhile. It was also gratifying to learn that although the
original book was not intended as yet another undergraduate textbook,
teachers and students had welcomed the book as a gentle introduction to
the subject.
Contents:
1 ELECTRIC MOTORS
2 POWER ELECTRONIC CONVERTERS FOR
MOTOR DRIVES
3 CONVENTIONAL D.C. MOTORS
4 D.C. MOTOR DRIVES
5 INDUCTION MOTORS – ROTATING FIELD,
SLIP AND TORQUE
6 OPERATING CHARACTERISTICS OF
INDUCTION MOTORS
7 INDUCTION MOTOR EQUIVALENT CIRCUIT
8 INVERTER-FED INDUCTION MOTOR DRIVES
9 STEPPING MOTORS
10 SYNCHRONOUS, BRUSHLESS D.C. AND
SWITCHED RELUCTANCE DRIVES
11 MOTOR/DRIVE SELECTION

Download:       Click here to download

Protection of Electrical Networks Free e-books

                                                                             Protection of Electrical Networks

This ebook is very useful for engineer to understand protection scheme in electrical network. Protection engineer need to know the techniques in relays protection to apply with their work in power system. this e-book explain the main function of each relay types and protection schemes. Protection device in power system, relay are the main devices that engineer use. this book explain clearly about the protection of Electrical Networks.                                                              

Click here to download

Hight Voltage Engineering [Free E_Books]

Hight Voltage Engineering


An attempt has been made in this book, to bring together different topics in high voltage engineering to serve as a single semester course for final year undergraduate students or postgraduate students studying Electrical Engineering. This book is also intended to serve power engineers in the industry who are involved in the design and development of electrical equipment and also engineers in the electricity supply and utility establishments. It provides all the latest information on insulating materials, breakdown phenomena, overvoltage, and testing techniques.
Download:
http://hotfile.com/dl/141408818/63dacac/Hight_Voltage_Engineering.rar.html

Broadband power line communication system [Free E_Books]

Broadband power line communication system


This book covers both the theoretical and practical aspects of BPLC technology. Advances in BPLC, which is essentially a blend of classical transmission line (TL) theory and communication and networking theories, have made it possible for broadband services to be used to link urban and rural areas efficiently and economically using a readily available and largely distributed power line infrastructure, for multi-service data transmission, high-speed internet access, and Voice Over Internet Protocol (VOIP), etc.

Written for both university students in Electrical Engineering and Telecommunications Engineering (senior undergraduate as well as graduate) and industry engineers and specialists involved with planning, design, and improvement of BPLC systems, the book includes chapters on the fundamental aspects of the well-known TL theory, and communication and networking theories as background for the other chapters. The topics covered also include classification of BPLC systems, models for analyses based on TL theory, estimation of channel capacity and performance and finally application of modulation, coding and media access control techniques for boosting the performance of BPLC systems.
Download:
http://hotfile.com/dl/141328254/9bd1bec/Broadband_power_line_communication_system.rar.html

Electrical engineering [Free E_Books]

Electrical engineering

Electrical Engineering 101 covers the basic theory and practice of electronics, starting by answering the question "What is electricity?" It goes on to explain the fundamental principles and components, relating them constantly to real-world examples. Sections on tools and troubleshooting give engineers deeper understanding and the know-how to create and maintain their own electronic design projects. Unlike other books that simply describe electronics and provide step-by-step build instructions, EE101 delves into how and why electricity and electronics work, giving the reader the tools to take their electronics education to the next level. It is written in a down-to-earth style and explains jargon, technical terms and schematics as they arise. The author builds a genuine understanding of the fundamentals and shows how they can be applied to a range of engineering problems.

This third edition includes more real-world examples and a glossary of formulae. It contains new coverage of:

• Microcontrollers
• FPGAs
• Classes of components
• Memory (RAM, ROM, etc.)
• Surface mount
• High speed design
• Board layout
• Advanced digital electronics (e.g. processors)
• Transistor circuits and circuit design
• Op-amp and logic circuits
• Use of test equipment

• Gives readers a simple explanation of complex concepts, in terms they can understand and relate to everyday life.
• Updated content throughout and new material on the latest technological advances.
• Provides readers with an invaluable set of tools and references that they can use in their everyday work.

Download:
http://hotfile.com/dl/141328546/5725eba/Electrical_engineering.rar.html

Electrical Course for Apprentices and Journeymen

Electrical Course for Apprentices and Journeymen

Published simultaneously in Canada
No part of this publication may be reproduced, stored in a retrieval system, or transmitted in any form or by any means, electronic, mechanical, photocopying, recording, scanning, or otherwise, except as permitted under Section 107 or 108 of the 1976 United States Copyright Act, without either the prior written permission of the Publisher, or authorization through payment of the appropriate per-copy fee
to the Copyright Clearance Center, Inc., 222 Rosewood Drive, Danvers, MA 01923, (978) 750-8400, fax (978) 646-8700. Requests to the Publisher for permission should be addressed to the Legal Department, Wiley Publishing, Inc., 10475 Crosspoint Blvd., Indianapolis, IN 46256, (317) 572-3447, fax (317) 572-4447.

Download:
http://www.4shared.com/file/nxbx7BqY/AudelElectricalCourseforAppren.html

Basic Electrical Installation

Basic Electrical Installation



Newnes
An imprint of Elsevier
Linacre House, Jordan Hill, Oxford OX2 8DP
30 Corporate Drive, Burlington, MA 01803
First published by Arnold 1998
Reprinted by Butterworth-Heinemann 2001, 2002, 2003 (twice), 2004 (twice)
Fourth edition 2005
Fifth edition 2008

 The right of Trevor Linsley to be identifi ed as the author of this work has been asserted in accordance with the

Copyright © 2008, Trevor Linsley. Published by Elsevier Ltd. All rights reserved
Copyright, Designs and Patents Act 1988

  No part of this publication may be reproduced in any material form (including photocopying or storing in any medium by electronic

Written to meet the requirements of the 2330 Level 2 Certifi cate in Electrotechnical Technology – Installation route
(buildings and structures), and the Level 2 NVQ in Installing Electrotechnical Systems (2356) from City & Guids.

Download:
Click here to download

Basic Electrical Engineering

Basic Electrical Engineering


File Type: PDF
File size: 28.5MB

Download:

http://www.4shared.com/file/V3JG5SYb/BasicElectricalEngineering.html

Advanced Electrical Installation Work

Advanced Electrical Installation Work

The 5th Edition of Advanced Electrical Installation Work has been completely

rewritten in 10 Chapters to closely match the 10 Outcomes of the

City and Guilds qualifi cation. The technical content has been revised and

updated to the requirements of the new 17th Edition of the IEE Regulations

BS 7671: 2008. Improved page design with new illustrations gives greater

clarity to each topic.

This book of electrical installation theory and practice will be of value to

the electrical trainee working towards:

● The City and Guilds 2330 Level 3 Certifi cate in Electrotechnical

Technology, Installation Route.

● The City and Guilds 2356 Level 2 NVQ in Installing Electrotechnical

Systems.

● The SCOTVEC and BTEC Electrical Utilisation Units at Levels II and

III.

● Those taking Engineering NVQ and modern Apprenticeship

Courses.

Advanced Electrical Installation Work provides a sound basic knowledge of

electrical practice which other trades in the construction industry will fi nd

of value, particularly those involved in multi-skilling activities.

The book incorporates the requirements of the latest Regulations,

particularly:

● 17th Edition IEE Wiring Regulations.

● British Standards BS 7671: 2008.

● Part P of the Building Regulations, Electrical Safety in Dwellings:

2006.

● Hazardous Waste Regulations: 2005.

● Work at Height Regulations: 2005.

Download:

Click here to download

practical.scada.industry

practical.scada.industry

Newnes

An imprint of Elsevier

Linacre House, Jordan Hill, Oxford OX2 8DP

200 Wheeler Road, Burlington, MA 01803

First published 2003

Download links:

http://www.4shared.com/file/8fSap_aQ/practicalscadaindustry.html

Practical Troubleshooting Of Electrical Equipment And Control Circuits

Practical Troubleshooting Of Electrical Equipment And             

Control Circuits

There is a large gap between the theory of electron flow, magnetic fields and that of troubleshooting

electrical equipment and control circuits in the plant. In this book, we try to avoid or at least minimize

discussions on the theory and instead focus on showing you how to troubleshoot electrical equipment

and control circuits. The book helps to increase your knowledge and skills in improving equipment

productivity whilst reducing maintenance costs. Reading this book will help you identify, prevent and

fix common electrical equipment and control circuits. The focus is ‘outside the box’. The emphasis is

on practical issues that go beyond typical electrical theory and focus on providing those that attend

with the necessary toolbox of skills in solving electrical problems, ranging from control circuits to

motors and variable speed drives.

This book focuses on the main issues of troubleshooting electrical equipment and control circuits of

today to enable you to walk onto your plant or facility to troubleshoot and fix problems as quickly as

possible. This is not an advanced book but one aimed at the fundamentals of troubleshooting systems.

The book is very practical in its approach to troubleshooting and the examples you will be shown are

applicable to any facility.

We would hope that you will gain the following knowledge from this book:

• Diagnose electrical problems ‘right-first-time’

• Minimize the expensive trial and error troubleshooting approach

• Reduce unexpected downtime on electrical motors and other equipment

• Improve plant safety

• Learn specific techniques to troubleshoot equipment and control circuits

• Analyze equipment problems

• Determine causes of equipment failure

• Troubleshoot electrical equipment and control circuits.

Typical people who will find this book useful include:

• Plant Electricians

• Mechanical Engineers

• Production Operators and Supervisors

• Utilities Maintenance Personnel

• Plant Engineers.

Download links:

http://www.4shared.com/file/FN_zfrNh/Practical_Troubleshooting_Of_E.html

Windpower Workshop - Building Your Own Wind Turbine

 

Windpower Workshop - Building Your Own Wind Turbine

This is show the way that you can build your own wind turbine

Download links:

http://www.4shared.com/file/3wae7ccL/Windpower_Workshop_-_Building_.html

Practical Power System Protection

Practical Power System Protection

Newnes

An imprint of Elsevier

Linacre House, Jordan Hill, Oxford OX2 8DP

30 Corporate Drive, Burlington, MA 01803

First published 2004

Download links:

http://www.4shared.com/file/UOz3C2ED/Practical_Power_System_Protect.html

Basic Electrical Engineering

| PDF | 625 pages |




Download links:
http://hotfile.com/dl/144110501/3dd7efb/Electrical.html